Coin Rubber Garage Floor Mat Non-Slip - 3mm Thick Roll Black

Coin Rubber Garage Floor Mat is the perfect solution for protecting and beautifying your garage floor. Made of durable 3mm thick rubber, this matting is designed to withstand the heavy traffic and rough conditions found in garages, vans, and other high-use areas.

The textured coin design provides excellent traction, making it safe and comfortable to walk on even when wet. The raised edges help to contain spills and debris, keeping your garage floor clean and tidy. The rubber material is also resistant to water, chemicals, oil, and grease, making it easy to clean and maintain.

Installing our Coin Rubber Garage Floor Mat is a breeze. Simply roll out the mat and trim it to fit your desired area. It can be easily cut with a utility knife or scissors. No glue or adhesives are required, making it easy to remove or reposition the mat if needed.

Not only is our Coin Rubber Garage Floor Mat functional, it also adds a touch of style to your garage. The coin pattern gives the mat a classic, industrial look that will complement any decor. It's the perfect finishing touch for any garage makeover.

Coin Rubber Garage Floor Mat is a durable, functional, and stylish choice for any garage or high-traffic area. Its 3mm thick rubber construction and textured coin design provide excellent traction and spill containment, while its easy installation and low maintenance make it a practical choice for busy households.

– Roll width – 1.5 Metres
– Weight – 3500gsm
– Thickness – 3mm
– Surface finish – Coin Pattern
– Material – 100% SBR recycled rubber
– Temperature Range – -30 to +70 ° C

Coin Pattern Anti-Slip Rubber Flooring Roll is easy to install and can be easily cut to fit any space. It can be cut with a safety knife or scissors, making it a convenient choice for both residential and commercial use. Whether you need to fit it around pipes, corners, or other obstacles, this rubber flooring roll is easy to work with.

Here is a step by step guide to installing Coin Pattern Anti-Slip Rubber Flooring Roll:

1. Measure and mark the desired length of the rubber flooring roll using a tape measure and pencil.
2. Use a sharp blade, such as a safety knife or scissors, to carefully cut the rubber flooring roll to size.
3. Clean and prepare the subfloor by removing any debris, dirt, or other obstructions.
4. Lay out the rubber flooring roll in the desired location, making sure to leave enough overlap at the edges for a seamless look.
5. Use double-sided tape or a rubber flooring adhesive to secure the rubber flooring roll in place.
6. Trim any excess rubber using a sharp blade, following the outline of the floor or adjacent surfaces.
7. Repeat the process for any additional sections of rubber flooring roll, making sure to match the patterns and seams for a cohesive look.

Please Note - Remember to use caution when cutting and handling the rubber flooring roll, and follow the manufacturer's instructions for proper installation and maintenance. With these simple steps, you can easily install Coin Pattern Anti-Slip Rubber Flooring Roll in your home or business.